This page is dedicated to all my zigbee devices, and how to reset them, so i can re-connect them with new zigbee networks..
| Device Type | Reset – how to |
| Ikea Rodret E2201 / W2314 on-off switch Ikea Styrbar E2313 four button switch | 4x quick press connect button. Led will flash red. |
| Ikea Tradfri Driver (30w) (grey block) | With paperclip press in hole for 5 seconds. The connected lights will go blinking |
| Ikea Tradfri LED2106R3 Ikea TradFri LED2103G5 (Witte Bulb) E27 | 4x poweron/off, then on. Light wil go flashing |
| Ikea Tradfri LED2102G3 (Sierbulb) E27 | 5x poweron/off, then on. Light wil go flashing |
| HOBEIAN ZG-303Z (Soil moisture sensor) | Press button 5 seconds. Light wil go flashing. |
| HOBEIAN ZG-204Z (Motion sensor, small, round | Press with paperclip in hole for 3 seconds. Will go flash red. |
| Tuya TS0202 TZ3000_uw3dadam (Motion sensor, big, 2AAA batteries) | Press with paperclip in hole at short-side for 3 seconds. Will go flash red. |
| IKEA Kajplats E27 470lm – LED2411G3 (Matter) | 15x poweroff/on. Light wil go flashing. Joins with normal ‘Join Allow’ within Zigbee2MQTT |
